I would like to remind you of the request.
Printable View
is there histogram version of this allaverages indicator?
thanks
As I know - there is the following indicator as histogram -
AllAveragesConsensus_v1.3 600+ indicator is on this post. This is the updated AllAveragesConsensus indicator with the new set of MAs and with ability to calculate in normalized scale (ShowNormalized=true) and as the Upcounter/Downcounter difference.
Hi ND, I refer to MT5, AllAverages_4.4mq5, The 14-ema line does not plot when I try to add a M15 timeframe to an M1 chart. Any idea what to do?
The 14-ema plots on the timeframes higher than M15 to MN but, it does not plot on the lower timeframes M5, M3 and M1.
Regards
Attachment 31685
Hi Eris,
This issue sometimes happens on MT4 also. I think it has to do with not having sufficient historical data. For MT5, place the below files into your Scripts folder and restart MT5 to compile. Then open a chart and run the script "downloadhistoryvisualmode" to download historical data for all timeframes for all pairs in the Market Watch.
madopter
Attachment 31686
Attachment 31687
Attachment 31688
Attachment 31689
Yes, madopter is correct - it depends on the history data (because we do not know about how many bars are used for the calculation in this indicator).
For example - this is M15 indicator on M5 chart:
Attachment 31690
and this is M15 indicator on M1 chart -
Attachment 31691
Thank you so much
Igorrad,
I thank you very much for the components you have made for mt5, they are very useful for me, the average AllAverages4.4.mq5 is really fantastic and creates many possibilities.
Is it possible that you add the option to apply the average over other components that are at the bottom of the chart, add the option ? apply to: "First Indicator's Data"
You mean - attach indicator to separate window?
You can use EmptySubwindow_v1 indicator (attached) - attach this indicator to the chart and after that - move Averages_v4.4 indicator by mouse to this empty subwindow.
Attachment 31708
Attachment 31709
Hi Sergei.
no it's not..
What i described is the option to add the "moving average" to a indicator like RSI or MFI or OBV, when you add the MA and in the MA you choose to get the "indicators firt's data"
get the candle data.... the moving average will be different when you select "indicator's first data" and the allaverage didn't have it if you put it inside a another indicator.
Igorad, manually is not possible as you described... but using a script (to operate manually in the chart) or in EA it can be applied without problems I think...
Hi baraozemo,
Please check out the AllAverages simple indicator which can be applied to any indicator including prices on the main chart. For that you should set a proper timeserie in the Parameters tab.
Attachment 31763
Regards,
Igor
Can we add this? https://www.multicharts.com/support/...s-tether-line/
Edit: Found one.
Attachment 31943
Dear Igor,
First I like to say thank for your help and attention...
the indicator has a problem with some assets.
see attached picture.
Igor,
Same problem with AllAverages_v4.4.mq5 (full version) when the market is closed...
Igor,
Same problem with AllAverages_v4.4.mq5 (full version) when the market is closed...
2018.05.29 09:28:59.265 AllAverages_v4.4 (WIN$N,D1) array out of range in 'AllAverages_v4.4.mq5' (184,14)
2018.05.29 09:28:59.265 AllAverages_v4.4 (WIN$N,D1) array out of range in 'AllAverages_v4.4.mq5' (184,14)
I applied a small fix but the market is opened now and I cannot test it, I will wait for the market close to see if the fix solved the problem...
from:
for(shift=0,y=0;shift<mtflimit;shift++)
to (fix):
for(shift=0,y=0;shift-1<mtflimit;shift++)
Hi,
Please check out the updated AllAverages indicators with the new set of prices for MT4 and MT5.
Attachment 31947
Regards,
Igor
Hi Igor,
Can you please add VWAP(Volume Weighted Average Price), if possible.
Regards,
Jag
Hi,
Please check out the updated AllAverages with the new 3 MAs:
- EWMA - Exponential Weighted Moving Average
- DsEMA - Double Smoothed EMA
- TsEMA - Triple Smoothed EMA
Attachment 32662
Regards,
Igor
Hi,
Please check out the updated AllAverages indicator for MT5.
Attachment 32678
Regards,
Igor
Hi Igor, i wanted to ask here again. This is your Metastock formula for Arnaud Legoux MA, how can we use this for taking buy-sell signals on explorer & system tester on Metastock.
I would appreciate it if you could help me with the lines to add to the formula.:)-:
Quote:
sigma:=Input("Sigma",0.5,10,6);
offset:=Input("Offset",0,1,0.85);
w0:= Exp(-Power(0-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
w1:= Exp(-Power(1-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
w2:= Exp(-Power(2-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
w3:= Exp(-Power(3-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
w4:= Exp(-Power(4-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
w5:= Exp(-Power(5-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
w6:= Exp(-Power(6-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
w7:= Exp(-Power(7-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
w8:= Exp(-Power(8-ROUND(offset*8-0.5),2)/(2*Power(9/sigma,2)));
s0:= w0*Ref(C,-8);
s1:= w1*Ref(C,-7);
s2:= w2*Ref(C,-6);
s3:= w3*Ref(C,-5);
s4:= w4*Ref(C,-4);
s5:= w5*Ref(C,-3);
s6:= w6*Ref(C,-2);
s7:= w7*Ref(C,-1);
alma:=If((w0+w1+w2+w3+w4+w5+w6+w7+w8)>0,(s0+s1+s2+ s3+s4+s5+s6+s7+w8*C)/(w0+w1+w2+w3+w4+w5+w6+w7+w8),C);
alma
Hello Igor,
Would it be possible to add an option to the AllAveragesConsensus so that it only recalculates once per bar.
Current version could be CalCEveryTick = True.
False would calculate the values for the last bar when a new bar starts.
It would be really appreciated.
Many thanks
MantaDiver
Hello Igor,
How do I fix the following message: "array out of range in AllAverages_..."
The settings are:
Attachment 33425
Thank you
is there anyone who has the source code for the version 8.8 of this indicator ? i found the ex4 file at forexfactory but am looking for the source code.. ill paypal someone $25 bucks if they have it and an example if the iCustom string to use it so i dont have to muddle through the syntax.
Hi
Is it possible to change the coding that like MT4's moving average can apply on RSI oscillator ?
I really need it
Thanks
It would be really useful if you turned your AllAverages indicator into a MTF AllAverages Crossover Dashboard, so you can configure any kind of MA crossover and check how it is doing from the dashboard across several timeframes, even better if you can see other markets/pairs too in the dashboard.